Manual Bench Rockwell Hardness Tester ASTM E18 Standard For Accurate Measurement

The manually operated HR-150A Rockwell hardness tester is highly appreciated for its perfection and very easy operation.
This machine uses the standard preliminary test force of 10 kgf. And main loads of 60/100/150 kilograms conform the international Rockwell standard.
After each test the HR-150A shows the Rockwell B or Rockwell C hardness value directly on the dial indicator.

HR-150A Rockwell Hardness Tester Details:

Applications:
• All metal (ferrous/non-ferrous)
• Hardened steel
• Annealed steel
• Bearings
• Hard drawn aluminum alloys

Specifications:
• Preliminary test force (minor load): 98.07N (10k9f)
• Test force (test load): 588.4N (60kgf), 980.7N (100kgf), 1471 N (150kgf)
• Table up/down drive: Manual
• Load application: Lever (loading-duration-release)
• Load duration: Conform standard
• Hardness scales: HRA, HRB and HRC on dial scale
• Accuracy: HRC±1.0, HRB±1.5

Specimen:
• Maximum height: 170mm (6.7")
• Maximum depth: 165mm (6.5") from center of indenter shaft
• Power supply: 220 V AC/50/60Hz
• Dimensions (WxDxH): 215x500x750mm (8.46x19.68x29.53")
• Mass: 85k

Standard accessories:
Large flat anvil: 1 pc.
Small flat anvil: 1 pc.
V-notch anvil: 1 pc.
Diamond cone penetrator: 1 pc. 1/16"
steel ball penetrator: 1 pc.
Rockwell standardized block: 5 pcs.